beyerdynamic TG D71

Transducer type

Condenser (back electret)

Operating principle

Pressure gradient

Polar pattern

Half-cardioid

Frequency response

25 - 20,000 Hz

Open circuit voltage

1.5 mV/Pa (-56 dBV)

Nominal impedance

< 200 Ω

Load impedance.

≥ 1 kΩ

Max. SPL at 1 kHz

148 dB [SPL@1% THD]

Signal-to-noise ratio

63 dB [A, RMS] 50 dB [CCIR, Q-Peak]

Noise voltage

1.1 μV [A, RMS], 4.9 μV [CCIR, Q-Peak]

A-weighted equivalent SPL

31.2 dB

Polarity.

Positive pressure produces positive voltage on pin 2 in relation to pin 3

Wiring

bal. with 3-pin XLR male

Connection

XLR, 3-pin, male

Power supply

Phantom power

P48 (+48 VDC ±4 VDC, 6.8 kΩ ±20%, current consumption: < 3.2 mA)

P24 (+24 VDC ±4 VDC, 1.2 kΩ ±20%, current consumption: < 3.2 mA)

P12 (+12 VDC ±4 VDC, 680 Ω ±20%, current consumption: < 3.2 mA)

L x W x H

90 x 86 x 27 mm

Weight

413 g

試してみました。(ProductReviewにジャンプします)

『さて、今回見ていくのもbeyerdynamicです。今回はBoundary micのTG D71です。
Boundary micというよりInside-kick drumのマイクとお伝えしたほうが良いかもしれません。...』

続きへ