特徴
- 小型パワード2WAYシステム
- 同軸非対称拡散特性テクノロジー
- クラスDアンプとDSPを内蔵
- Danteデジタルネットワークオーディオ
- 80° x 50° 回転式ホーン
- パワーファクターコレクション(PFC)機能を搭載したユニバーサル電源
- ユーザー回転可能なCDDドライバー
- 縦向き横向きに設置可能なオプション
- ツアーグレード多角形合板エンクロージャー
- IP24グレードのオプションと背面カバー
- さまざまな固定金具
Spec
- TYPE
- Compact, Coaxial Differential Dispersion powered two-way system
- FREQUENCY RESPONSE (1)
- 62Hz - 20kHz ±3dB, -10dB @ 50Hz
- DRIVERS
- LF: 12" (300mm)/2.5" (63.5mm) voice coil, long excursion, shared ferrite
- motor system with HF
- HF: 1" (25mm) exit/1.7" (44mm) voice coil, polyimide dome
- compression driver
- INPUT SENSITIVITY
- -18dBu for 100dB SPL
- MAXIMUM SPL (2)
- 122dB continuous / 128dB peak
- DISPERSION
- 110°-60° horizontal, 60° vertical (user-rotatable)
- CROSSOVER
- 1.5kHz Active LR8 with low latency HF FIR equalisation
- Balance presets for pole mount/ pole mount with sub/ stage monitor
- CONNECTORS
- Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon
- ANALOGUE INPUT IMPEDANCE
- 20 kΩ balanced to ground
- MAXIMUM ANALOGUE INPUT LEVEL
- 24.6 Vpp (+21dBu), over voltage protected
- Internal Processing
- Multi-channel DSP, programmable via TCP/IP using VU-Net software
- PEQ/shelving filters
- Up to 48dB/Oct HPF
- Low latency HF FIR filters
- Up to 200ms input delay
- Pre-set selection via rear panel switch
- CONNECTORS
- 2xNeutrik® Ethercon
- PROTOCOL
- TCP/IP and UDP/IP
- TYPE(Amplifier )
- 2 channel switch-mode, class D,
- Bridged Tied Load + 1 channel switch-mode, class D
- PEAK OUTPUT POWER
- 2500W total
- 2000W LF, 500W HF
- AVERAGE EFFICIENCY
- 89%
- COOLING
- External convection cooled, with internal fan
- MAXIMUM AMBIENT TEMPERATURE
- 40°C (104°F) for full output
- TYPE(Power Supply)
- Switch mode, fixed frequency with PFC
- AC INPUT OPERATING RANGE
- 85 - 265V ~ AC, 50 - 60Hz
- POWER FACTOR
- > 0.98
- NOMINAL POWER CONSUMPTION
- 550W
- MAINS CONNECTOR
- Neutrik® Powercon True1
- ENCLOSURE
- Extensively braced multi-laminate plywood.
- FINISH
- Textured black PU coating.
- PROTECTIVE GRILLE
- HEX perforated mild steel with protective zinc plating and black
- powder coat finish. Backed with black grille cloth
- FITTINGS
- Top hat for pole mounting
- 15 x M8 mounting points
- Two side pocket handles
- Optional weather protection cowl
- IP RATING
- IP24 factory option available
- DIMENSIONS
- (W) 359mm x (H) 580mm x (D) 373mm
- (W) 14.13in x (H) 22.83in x (D) 14.69in
- WEIGHT
- 28kg (61.6lbs) excluding Transit cover
- ACCESSORIES
- Transit Cover
- Optional wall, yoke and universal brackets
追加画像
クリックで別ウインドウで拡大します。